Air Showers
& Misting ShowersCleanroom Filtration
& HEPA Filters Cleanroom Benches
& FumehoodsAtmos-Tech Industries
CleanroomsCleanroom Storage
& TransportThrough Wall
Pass-Thru Systems
ETL
ULOn Select Products
Designers & Manufacturers of Controlled Environments
Cleanroom & Controlled Environment Products > Cleanroom Filtration & HEPA Filters > Item # AT-2000  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # AT-2000, AT-2000 Fan Filter Module


Atmos-Tech AT-2000 fan filter units are designed to be used in a standard or cleanroom ceiling system. The motorized impeller provides a lower profile than units with larger centrifugal blowers, but can still handle an additional .125" external static pressure. The filter element is individually scan tested to ensure leak free operation. The AT-2000 is available in 95%, 99.99% and 99.9995% efficiencies and varying filter pack depths. The standard unit is available in nominal 2' x 4' only however custom sizes are available.

The unit is available with an integral white powder painted expanded metal face screen as standard and optional perforated or expanded stainless steel or perforated anodized aluminum. Each unit comes with a variable speed control accessible by either room side or from above, also option of disposable pre-filter or duct collar. The unit is sized to deliver 720cfm to twice the initial static pressure of the clean HEPA filter. The AT-2000 is also available with a room side replaceable filter element that uses an upstream gel to ensure a positive seal.





Specifications

Dimensions for Standard Units
2' x 2'
2' x 3'
2' x 4' nominal
custom

Typical Components
Anodized aluminum HEPA, ULPA filter
Backward curved impeller motor/blower
Brushed aluminum blower housing
Duct collar or pre-filter
Power cord or junction box
Variable speed control

Noise Level
Rated less than 60 db on the A scale

Filters
HEPA filters are 99.99% efficient on particles .3 microns class 100 (ISO class 5)
ULPA filters are 99.9995% efficient on particles .12 microns class 10 (ISO class 4)

Velocity
Variable speed control can be adjusted to maintain an air flow velocity of 90-100 FPM

Electrical
60 cycles or as specified
Option requirements: 220 volt, 1 phase
Standard 110 volt, 1 phase


 MORE IMAGES 

·  T-Filter Clean Room System

·  AT2003-LIT2

·  Filters

·  Ft-lo-lit

·  HEPAa02

·  ULPA FILTER

·  High Capacity V-Bank

·  VF24


 DOWNLOADS 

AT-2000-1 Fan Filter Unit Schematic
(PDF, 50KB)

Filter Code Translation
(PDF, 10KB)


Atmos-Tech Industries | Designers & Manufacturers of Controlled Environments